| |
 |
|
|
HITACHI S10 Series Ethernet (HIT)
Driver Data Sheet
| Devices Supported: |
HITACHI S10/2a and S10/4a PLCs. HIT Tested with S10/2a PLC |
| Device
Manufacturer: |
Hitachi |
| Platform: |
Windows 95/98/NT/2000/XP |
| Interface Type: |
Ethernet |
| Max Devices
Supported: |
1 |
| Software Reqired: |
HITACHI S10ET Link Support System |
| Hardware Required: |
HITACHI S10ET Link for PLC, 3Com 3C509B EtherLink III
(adapter for PC) |
| Protocol: |
HITACHI Ethernet Protocol |
| Baud Rate: |
10Mb/s |
| Contact: |
Dimension Software, Inc.
1536 St. Clair Road, Taylorsville, NC 28681, USA
Voice: (828) 635-7189, Fax: (828) 625-5319,
E-Mail:  ,
Web: http://dimension-software.com |
| |
|
| Device Commands Supported
|
| |
| 4 |
Read Memory of Cell Controller |
| 5 |
Write Memory of Cell Controller |
| |
| Datatypes |
| Digital |
| 2 Byte Signed Integer |
| 4 Byte Signed Integer |
| |
| Memory Type Supported |
| |
| DW |
Q |
N |
JW |
TW |
ZW |
| TS |
G |
P |
YW |
UW |
SW |
| US |
R |
V |
QW |
CW |
FW |
| CS |
K |
E |
GW |
NW |
BD |
| X |
T |
Z |
RW |
PW |
TC |
| J |
U |
S |
MW |
VW |
UC |
| Y |
C |
XW |
KW |
EW |
CC |
| Bit writes are supported by the X - S memory areas |
| |
| Signal Conditioning |
| |
| NONE |
Returns Raw Value |
| LIN |
Value Scaled to EGUs |
| 3BCD |
3 Digit Binary Code Decimal |
| 4BCD |
4 Digit Binary Code Decimal |
| 12BN |
12 Bit Binary Scaled to EGUs - No Alarming on out of range |
| 12AL |
12 Bit Binary Scaled to EGUs - Alarming on out of range |
| 15BN |
15 Bit Binary Scaled to EGUs - No Alarming on out of range |
| 15AL |
15 Bit Binary Scaled to EGUs - Alarming on out of range |
|
|
|
© 2011 Dimension Software, Inc. All Rights Reserved.
|
|
|
| |
|