| Devices Supported: |
945 Microprocessor-Based Auto-Tuning Control |
| Device
Manufacturer: |
Watlow Controls , 1241 Bundy Blvd., Winona, Minnesota
55987-5580. Tel: (507)454-5300 Fax: (507)452-4507. |
| Profile Name: |
WAT945.PRO |
| Profile Built For: |
UOS |
| Platform: |
Windows NT4.0 / 2000 / XP |
| Interface Type: |
Serial: RS-232, RS-485, RS-422 |
| Max Devices
Supported: |
31 on an RS-485 multi-drop network, 10 on RS-422, 1 on RS-232 |
| Protocol: |
ANSI X3.28 |
| Baud Rates: |
9600 |
| Data Bits: |
7 |
| Stop Bits: |
1 |
| Parity: |
ODD |
| Comment: |
UW5 is comprised of the Universal OPC
Server (UOS) for Serial and TCP/IP Devices and the WAT945.PRO device
profile. The UW5 mnemonic is used to identify this unique combination. UOS will also
support many other serial or TCP/IP device profiles. Please refer to our web site for the
current list. |
|
UOS is a stand-alone OPC Server that can be used with any OPC
compliant Client such as Intellution’s FIX® or FIX Dynamics® or
OA’s Enterprise Automation software. UOS has many advanced features like: DataView,
DataScope, Serial and TCP/IP communications support, and multiple "different"
device support. Please refer to our web site for more information on UOS capabilities. |
| Contact: |
Dimension Software, Inc.
1536 St. Clair Road, Taylorsville, NC 28681, USA
Voice: (828) 635-7189, Fax: (828) 625-5319,
E-Mail:  ,
Web: http://dimension-software.com |
| References: |
UOS (Universal OPC Server) Electronic
Documentation |
| Group Name: |
Description |
| |
|
| SP1 |
Read/Write Loop 1 Setpoint |
| C1 |
Read Input 1 Value |
| AL1 |
Read/Write AL1 Type |
| AL2 |
Read/Write AL2 Type |
| A1HI |
Read/Write ALM 1 High Limit |
| A1LO |
Read/Write ALM 1 LOW Limit |
| ALM |
Read/Write ALM Type |
| AUT |
Read/Write Auto Tuning |
| BTYP |
Read BTYP Backup Sensor Type |
| CAL |
Read/Write Calibration Offset |
| CF |
Read/Write CF_Celcius_Fahrenheit |
| CLUP |
Read/Write SPC Control Limits Update |
| CT1 |
Read/Write Output 1 Cycle Time |
| DAY |
Read/Write Day Of The Month/Data Log |
| DB |
Read/Write DB_Dead Band |
| DEC |
Read/Write DEC_Location of Decimal Pt. |
| DE1 |
Read/Write DE1/Derivative Func. for output |
| DFL |
Read/Write DFL |
| ERR |
Read Analog Input Error |
| ER2 |
Read Communications Error |
| HOUR |
Read/Write Hour for Logging Data |
| HYS1 |
Read/Write Output 1 Switching hys. |
| IN |
Read IN Selects Input Sensor Type |
| INT |
Read/Write DNT Time Interval for Logging |
| IT1 |
Read/Write IT1 Reset control for output |
| LAT1 |
Read/Write LAT1 Alarm Latch/non-Latch |
| LINE |
Read/Write Lines per Page for Logging |
| LOC |
Read/Write Lock Front Panel |
| LOG |
Read/Write Logging Off |
| L-R |
Read/Write Local SP/Remote SP |
| LSL |
Read/Write SPC lower spec limit |
| MAN |
Read/Write MAN Manuel % Output |
| MDL |
Read MDL Software Revision |
| MIN |
Read/Write MIN Minute For Data Logging |
| MODE |
Read IN Selects Input Sensor Type |
| MON |
Read/Write MON Month for Data Logging |
| OT1 |
Read/Write Output 1 Action |
| OT4 |
Read/Write Setpoint R/Process Retransmit |
| PB1 |
Read/Write PB1 Proportional Band Out1 |
| PB1% |
Read/Write PB1% Output X Proportional |
| RH |
Read/Write SP High Limit |
| RL |
Read/Write SP Low Limit |
| RA1 |
Read/Write RA1 Rate Function |
| RE1 |
Read/Write RE1 Reset Control Action |
| RSP |
Read/Write Remote Set Point |
| RTD |
Read/Write RTD |
| SIL |
Read/Write Alarm Silence ON/OFF |
| TAG |
Read/Write |
| TBS |
Read/Write SPC Time interval in minutes |
| USL |
Read/Write SPC Upper spec limit |
| YEAR |
Read/Write Year For Data Logging |
| Signal Conditioning
Name: |
Description: |
| NONE |
No Scaling |
| LIN (Unsigned) |
Scales 16-bit unsigned values to the database block's EGU
range. |
| LIN (Signed) |
Scales 16-bit signed values to the database block's EGU
range. |
| 3BCD |
Scales 3-digit Binary Coded Decimal values to the database
block's EGU range. |
| 4BCD |
Scales 4-digit Binary Coded Decimal values to the database
block's EGU range. |
| 8BN |
Scales 8-bit binary values to the database block's EGU
range. Ignores the most significant byte. No Alarming on Out of Range. |
| 8AL |
Scales 8-bit binary values to the database block's EGU
range. Ignores the most significant byte. Alarming on Out of Range. |
| 12BN |
Scales 12-bit binary values to the database block's EGU
range. Ignores the most significant nibble (4-bits). No Alarming on Out of
Range. |
| 12AL |
Scales 12-bit binary values to the database block's EGU
range. Ignores the most significant nibble (4-bits). Alarming on Out of
Range. |
| 13BN |
Scales 13-bit binary values to the database block's EGU
range. Ignores the most significant 3 bits. No Alarming on Out of Range. |
| 13AL |
Scales 13-bit binary values to the database block's EGU
range. Ignores the most significant 3 bits. Alarming on Out of Range. |
| 15BN |
Scales 15-bit binary values to the database block's EGU
range. Ignores the most significant bit. No Alarming on Out of Range. |
| 15AL |
Scales 15-bit binary values to the database block's EGU
range. Ignores the most significant bit. Alarming on Out of Range. |
