Home | OPC Servers and iFix Drivers | Universal OPC Server | Custom Work | Contact Info

How to Start the UOS OPC Server Window

Starting the UOS Server Window
Step Action
1. Run the UOS PowerTool
2. In the PowerTool tree area select the server item (click on UOS). It MUST remain highlighted.
3. While the UOS tree item is highlighted, enter Alt-Shift-S on the PC keyboard and the UOS Server window will be displayed. It will be minimized so you may have to look for it on the MENU bar.
   
Using the UOS Server Window
Step Action
1. In the Server window select the View drop-down menu and make sure all menu items are checked by clicking on each item.
2. Do not use any of the File drop-down menu items (i.e. New, Open, Save As) because this will change the configuration you have selected at the PowerTool. In fact these menu options are identical to the corresponding File drop-down menu item in the PowerTool.
3. Look for any messages in the Server Window and record.
   
Stopping (Closing) the UOS Server Window
Step Action
1. In the PowerTool tree area select the server item (click on UOS). It MUST remain highlighted.
2. While the UOS tree item is highlighted, enter Alt-Shift-S on the PC keyboard and the UOS Server window will close.
© 2011 Dimension Software, Inc. All Rights Reserved.